Comments
-
Hi @BluntDude , Apologizes for the delay in responding back. If the issue is still persisting, can you please share more details on vpn clients and the wifi setup with firewall.
-
Hi @Jeff_L Apologies for the delay in replying back to your queries. If the issue is still occurring related to network access, we would need to verify by performing captures on the firewall as you mentioned the address gets resolved but the traffic access is not working. Regards Nevyaditha P
-
Hi @Logan_Kempisty , Are you trying to make changes on the firewall for the X1 to X8 port and want to do the same via the MGMT port? If yes, please have a machine connected to the MGMT port with ( 192.168.1.254 as the gateway of the computer to access the MGMT interface of the firewall).
-
Hi @JESUS , The appliance you have received is a secondary appliance and can't be used as a standalone unit. All the licenses will be shared from the Primary appliance to the Secondary Licenses. When the appliances are associated as an HA pair, they share licenses. In addition to High Availability licenses, this includes…
-
Hi @ole , Please find the kB below: We can restrict the user access but the SSLVPN clients will have the same address range and single profile. Regards nevyaditha P
-
Hi , Please follow the steps listed below in the article: https://www.sonicwall.com/support/knowledge-base/integrating-ldap-over-tls-in-sonicos-enhanced-with-windows-server-2008/170505906414103/
-
Hi @janjezek , Can you please confirm the NAT Policies are set up appropriately on the firewall for the inbound call flow?
-
Hi Can you try to log in to the firewall using the SSH login and then verify? Thanks
-
Hi @wdubose , We dont need to enable any other setting. Are you testing the website access from the machine you are logged into the SonicWall? If yes, make sure you are logged off the SonicWall or the Exclude CFS for administrator is disabled and test, Regards
-
Hi @wdubose , The license page showing "Content Filtering Client" shows "Not Licensed" is actually for a different feature. This feature will help the administrators to control the traffic and block the traffic on end point machines when they are not behind the Firewall network. Please verify the configurations as per the…
-
HI @DisaRicks , Please find the KB below :
-
Hi @MZUP, Please check the below KB : Regards Nevyaditha P
-
Hi @Enzino78 , Can you please confirm the presence of access rule for the NETBIOS service is configured from the SSLVPN to the LAN or (the zone where the host is configured )? Thanks
-
Hi @UTCTech , Can you please follow the KB below: This article describes how to workaround the drop "(Invalid TCP Flag(#2)), Module Id: 25(network)" due to network issues. Regards
-
Hi @tejasshenai , Please ensure that you have CLient DPI-SSL enabled on the firewall for this configuration requirement to work. Regards Nevyaditha P