Comments
-
Hi @samaj , You can track the log context and check if the Port scans are arriving on your WAN. Ignore, If the port scan from inside your network. If the Logs are from the same WAN IP then either you can block the IP by using the access rule. For Trackback you can disable the logging level for that event id and then enable…
-
Hi @proc1 , When we make use of OpenDNS or Google DNS it should work fine. Can you please reach out to Support for further analysis as this issue needs real-time troubleshooting? Thanks
-
Hi @GMP , Have you listed the domain under the Directory-> Trees E Enabled the option Allow referrals – Select this option for SonicWall to search user information located on Domain B LDAP server Thanks
-
Hi @AronS, Can you please configure the rule from source as WAN zone to Destination as Any zone and then monitor ?
-
Hi @Vinrugg2022 , For the RDP to the machine behind the network through the SSLVPN client, please follow the KB below related to configuration articles Regards Nevyaditha P
-
Hi @AronS , You can create an inbound access rule to block the traffic from that specific IP address. Please follow the KB below: Thanks
-
Hi @kjpalmer100 , Huawei Modem 3372h and 3372s have been released by Huawei in multiple variants (i.e. -608, -153, -607, -517, -511) and with different protocols. At the moment, SonicOS does not support Huawei Proprietary protocol so all the variants using a non-standard or proprietary protocol are not supported or require…
-
Hi @harriskim25 Please follow the KB below for the initial setup: For more related KB articles, Please visit : Regards Nevyaditha P
-
Hi @Twizz728 , Please find the KB articles listed below for the assistance: Thanks
-
Hi Preston, I assume you are mentioning about the Diagnostics tab. The diagnostics tab on Gen 7 appliance is available under the Device section. Navigate to Device/Diagnostics Please let me know if you have any query. Thanks Nevyaditha P
-
Hi @MikeBMiller , Only for Firmware 6.5.4.4, the profile for WAN group was missing and we had to enable it specifically on zone level. Upon upgrading the firmware to 6.5.4.5 and above the profile for WAN group VPN is available by default under the VPN tab. Sorry for the inconvenience caused. Thanks
-
Hi @MikeBMiller, On 6.5.4.X Firmware the WAN group VPN profile was disabled. We need to enable a checkbox manually under the zones to be able to view the profile and configure the same. Please follow the KB below: Please let us know if you still have any queries or concerns and would be glad to assist you further. Thanks!!
-
Hi @dan , Can you please confirm the firmware on SonicWall ? If you are currently running on SonicOS 6.5.4.6-79n then I would suggest you to follow the KB below as this issue is reported and we have a fix available for the same. -Can you also let us know if you are using the SonicWall Mobile connect on Tunnel mode or split…
-
Hi @Darshil , You can find out the maximum number of address objects/groups supported in the TSR . In the TSR, please look for and find "#Network : Address Objects_START" and it will show the maximum number of address objects and address groups supported. Thanks!!
-
Hi @HCECENES_93, The screenshot attached states that the Geo Enforcement or Geo-IP for visualization is not enabled. Please click on the link and enable it. Also, If the issue persists can you please confirm if the appliance is able to resolve "utmgbdata.global.sonicwall.com". To test the connectivity, Please navigate to…