Comments
-
Hi @Halon5 , I am working remotely from home and don't have access to physical SonicWave at the moment. I am having issues with testing this scenario with respect to end user devices connected. I am trying to get the test done through different means. I will update the thread with the KB article once it is done. Appreciate…
-
Hi @JimmyLittle , -Are you currently using local DHCP server on the network or the using the SonicWall as the DHCP server ? -Do you see the client stuck in Acquiring IP address? If not, what does the log information on the client show? -Are all the clients unable to connect to the VPN ? -Is the AT&T providing a static or…
-
@ReverendC , The Navigation steps listed in the KB article is for all SonicWall Firewalls with firmware SonicOS 6.5.X Series and above. Can you please let us know the current firmware on TZ300? The VOIP section on Firewall is for configuring settings related to VOIP protocol SIP and H.323. Can you please let us know what…
-
Hi @ReverendC, Yes, we can configure QoS on SonicWall, Please follow the KB Hope this helps. Thanks
-
Thank you @Sliderhome for the update.
-
@Halon5 , I apologize for the delay in responding back to you on this. I am closely monitoring the Case 43428904 and checking with SME from Email Security for the reason behind the issue. I did get below information to investigate about the issue: -We need to check if Email Security queries the same DNS server as set in…
-
Hi @Sliderhome , Thank you for the update. I am working on this to find out why these settings are not supported on sonicpoint models as shown below: I will update you with further information. Thank You!!
-
@HCECENES_93 , Thank you for contacting Community. There were lots of code changes after 6.2.6.1. I would suggest going to an intermediate firmware 6.2.9.2 before upgrading to 6.5.4.6. Please follow the KB for the firmware upgrade procedure. Please take a backup of your configuration as and when you upgrade to the next…
-
Hi @BWC , I am able to download the Release notes I am attaching the Release notes for reference for GVC 4.10.4 http://software.sonicwall.com/GlobalVPNClient/Documentation/232-005307-00_RevA_GlobalVPNClient_4.10.4_ReleaseNotes.pdf Please try now. I hope this helps. Thanks
-
Good Work @shiprasahu93
-
Hi @Darshil, To get the token Please navigate to the client PC--> add, remove programs and uninstall the client. Then it will give you the token. For unlock key please follow the steps mentioned by @shiprasahu93 . Thanks !!
-
Hi @Darshil , Please check the below KB on how to filter the Logs: Please filter the logs for the App control Prevention category and find the signature that is blocking the Chrome update. Thanks!!
-
Very useful information for users who generally like to restrict the traffic.
-
Hi @Yuber_Sierra , Regarding the data migration, let me check on our and update the thread. But I did find that there is no migration path from existing Analyzer to SonicWall Analytics as it’s a completely new product. Also, there is no direct upgrade path from Analyzer to Analytics. Thanks
-
Hello @GTINetworks , Hope you are doing good. Yes, we can add the DHCP scope on the Sonicwall for the X2 Interface or other interfaces without having any conflicts with the existing X0 subnet. -Please ensure the DHCP server option is enabled and the DHCP scope for the X0 interface is disabled or deleted -Configure the X2…