-
Re: How to add VLANs and portshield
I've tried both ways(firewall UI and direct connect) to setup VLANs on this switch with no success. The only way I can get it to recognize a VLAN through firewall UI is if I portshield the port but t… (View Post)1 -
Re: Email Security Gateway cannot reach destination hosts
I've sorted this out. They were two seperate issues/causes. I incresed the max connections on the receive connector and this has so far eliminated the warning about connection loss. I also discoverd … (View Post)1 -
Re: PEAP and MAC authentication
I just found this reading through the connectivity guide: IMPORTANT: You cannot enable the Remote MAC address access control option at the same time that the IEEE 802.11i EAP is enabled. If you try t… (View Post)1 -
Re: 12-8 POE
Unfortunately after having several eyes look at these it appears these switches just don't do what we were told they could do by the vendor very easily. Management has chosen to keep with the simplic… (View Post)1 -
Re: How to add VLANs and portshield
Unfortunately after having several eyes look at these it appears these switches just don't do what we were told they could do by the vendor very easily. Management has chosen to keep with the simplic… (View Post)1