Comments
-
5.0.13 was successfully downloaded and works for me. macOS Sequoia 15.2
-
@BWC - Thank you for your testing and feedback. This has now been reported to our Support team who are going to work further with engineering. Thanks !
-
Hi @BWC - we are testing/checking on this one ..
-
Good Morning @BWC - Please could you run this test again with " Enable DNS host name lookup over TCP for FQDN " Enabled. Firewall UI » Network » DNS » Settings. On the Page under DNS Rebinding and Cache Lookup.
-
HI @pja6161 I believe this is a possible Issue with the UI on that Page. Please can you DM me your contact details, Serial# of the firewall and I'll engage my support team to work with you on this.
-
Hi @ratherman - Thanks for working with the Support team in addressin this Issue. GEN7 to GEN7 migration of the settings ( like for like OR lower to higher ) such as the one you were seeking can be performed directly by importing the settings from the 670 to NSa 2700. This is the KB article to refer: Can Settings be…
-
HI @ratherman - Please reach out to me via DM and I'd like to engage my team to work with you on this.
-
Greetings @BWC , @ratherman the next upcoming version of MT will have the option for using the SonicOS 7.1.3 and 7.0.1-5165 as the Target Release. For now , The suggestion is to use the SonicOS 7.1.2 as the Target Firmware and then : Import the settings onto the firewall operating with SonicOS 7.1.3 Import the settings…
-
hi @Larry - Feedback on that has been sent to our teams. Thank You.
-
Good Afternoon Michael, SonicWall is currently running two release trains to support Gen7 firewalls. SonicOS 7.0 and SonicOS 7.1. 7.1.1 and 7.1.2 are the release versions on the SonicOS 7.1 branch. We recommend users running software versions SonicOS 7.1.1-7040, 7.1.1-7047, 7.1.1-7058, and 7.1.2-7019 upgrade to SonicOS…
-
@Teleporter — Hello , Pls can you let me know if you were to create that many ( 250 ) on the earlier version of Nx ? If so, which version please ?
-
The Migration Tool will not accept the TAR file itself. The tool supports an XML file for Sophos, not a TAR. Please extract the tar file and upload the Entities.xml file inside it. In the Entities.xml file , If there are no IP configurations on any of the interfaces, then this will cause the Migration Tool to not detect…
-
@TheoAdmin - Sorry to read about this. Let met get the appropriate team members looped in on this to help you out.
-
Hi @TheoAdmin - Hotfix Firmwares are not made available via downloads on mysonicwall.com By reporting a case to support , we are able to triage and make sure that the correct Hotfix Firmware(s) are being provided.
-
Hi @silvianjim - Yes, You can continue to additional settings on the firewall which are not license(s) dependent. Items such as vlans and SIP are not a problem. Also, You can also apply the licenses manually onto the firewall if you wish by following the step by step instructions from this article here: