Comments

• @Ben try to make sonicwall X1 ip as the DMZ ip on the ISP modem and assign the static ip assigned as DMZ on X1 of firewall(private ip) , and make the WAN ip on the modem to DHCP with authentication , I'm sure this can be done by the ISP as I have similar setup at home.

  in ISP Modem with static Address Comment by Santhosh May 2022
• This issue would be fixed in the upcoming NSM 2.3.3-5 release ETA Q2 2022.

  in NSM not showing other interfaces except for X0 Comment by Santhosh March 2022
• I tested this on My Cloud NSM ,here are the results. When I type in a name it takes it , I choose the drop down list and choose WAN for Zone Assignment and Type as Host or any from drop down and type the ip and it takes it. When I click on Zone Assignment it goes blank and I can choose the WAN, LAN, VPN etc. Selecting Zone…

  in Seeking comments from folks using NSM to create Templates with Objects Comment by Santhosh March 2022
• Workaround to get CT working on windows 10. go to device manager.Make sure L2TP and PPTP are enabled if not enabled reinstall with generic drives on the pc. Restart PC . Go to services.msc check if remote access connection manager is enabled and running. Now get the CT legacy verion 12.4.0.575, install and then connect to…

  in Can't connect with SonicWall Connect Tunnel on Windows 10 Comment by Santhosh July 2021
• Getting the same problem, I installed the latest latest version of CT from the Sonicwall portal. This all started after I uninstalled GVC 4.x on windows 10 Enterprise. I have completely uninstalled GVC now . Still unable to connect . Installed latest GVC 5.01120 and tested. Removed GVC completely and tested ,still same…

  in Can't connect with SonicWall Connect Tunnel on Windows 10 Comment by Santhosh July 2021