Ajishlal Community Legend ✭✭✭✭✭
Reactions
Comments
-
As I informed that, this is not related with any Firewall policy. Currently I am using the WNM and configured multiple zones and multiple SSID and I am facing the issue only where I am using the 600 series.
-
@faldo While I am doing the POC ( Sonicwave 641) as well as Sonicwave 621in production, It will work couple of days/week continuously but it will show the issue unexpectedly. Some days rebooted twice due the invalid password issue & I am pretty sure this is not due to the policy because the same policy I do have another…
-
@Larry I wont recommend to anyone for this 600 series units anymore. Paid a huge amount for getting this pain 😣. Yesterday I created the ticket & until now no one contacted me from the support.
-
@faldo @Larry @BWC @TIJU @Saravanan @Ateef @JamsheerVP Dears Fyi, Tested with Sonicwave 621 AP and I am getting the same issue (Invalid Password) but the same time 200 series AP's are working fine with the same SSID policy. I think all 600 Series having the same issue & reboot the AP is the only solution for fixing the…
-
@jacksreb, You can reserve the IP from the DHCP pool to a host. Navigate to ARP -->Static ARP Entries -->Add; Add your IP address which you want to exclude from the DHCP scope and bind with the host MAC address.
-
@khseo Make sure you dont have any unknown / unused FQDN object in your firewall & upgrade the latest Firmware it will help you to resolve the issue.
-
@faldo I am also facing the same issue and I tested with multiple unit (641) and all unit having same issue. What support team is telling about this issue? I was generated and analyze the logs and could not find any issue related with this problem. The same policy applied to 200 series and 641 series and facing issue only…
-
@Manoj Check the Gateway AV.
-
@Manoj CHeck capture ATP is enable. If its enable, try to disable the GW AV IMAP & POP3 scanning and try. (for testing purpose only).
-
@Vivek This is well noted.
-
@wgill TZ 300 wont give you 1Gbps through put, See the below maximum throughput for the Tz300.
-
@sonicuser1 The solution is Site to Site VPN and you can follow the below KB for the same.
-
@AJPixelbox make sure you configured the switch with your new VLAN? the ports are tag with new VLAN?
-
@SOILL_IT Try to apply as same as below scn shot. ie. I used P2P. Instead the P2P use the Multimedia category.
-
@Bestdetny disable the windows firewall and try as well as check Microsoft KB5009543 update patch, If its install uninstall the KB5009543 update and try.