Has anyone run into this? TZ370 running 7.0.0-r906. I am trying to enable https user login on the x0 IP and attached is the error I receive. I am not changing the zone at all, just toggling the https user login.
This seems to be an issue on the firmware version 7.0.0-R906. I have tested this on a TZ 370 running on 7.0.1-R1262 and there is no error displayed when I perform the HTTPS user login enable on X0 interface.
This specific 7.0.1-R1262 firmware is available on the MySonicWall and I would suggest you to upgrade your firewall to this specific firmware version.
Then how the HTTP management interface came in your screenshot? without enabling the "Allow management via HTTP", it will not show that icon in interface feature.
Answers
Hello @CGracheff,
Welcome to the SonicWall Community.
I tested this on the firmware 7.0.1-R1262 and could enable it with no issues. Could you please upgrade to this version and then test it again?
Thanks!
Shipra Sahu
Technical Support Advisor, Premier Services
Hi @CGRACHEFF,
Thank you for visiting SonicWall Community.
This seems to be an issue on the firmware version 7.0.0-R906. I have tested this on a TZ 370 running on 7.0.1-R1262 and there is no error displayed when I perform the HTTPS user login enable on X0 interface.
This specific 7.0.1-R1262 firmware is available on the MySonicWall and I would suggest you to upgrade your firewall to this specific firmware version.
Hope this helps.
Regards
Saravanan V
Technical Support Advisor - Premier Services
Professional Services
Hi @CGracheff
As per your screenshot, You enabled the "Allow management via HTTP",
Disable the"Allow management via HTTP" and try ( it's not recommended).
For Disable that, Navigate to Device / Settings / Administration --> Management
I have replicated this issue on 7.0.1-R1262 on a TZ570 with a similar configuration when it comes to management and user login.
"Allow management via HTTP" is currently disabled.
Hi @CGracheff
Then how the HTTP management interface came in your screenshot? without enabling the "Allow management via HTTP", it will not show that icon in interface feature.