In my opinion, we can apply the QOS priority using access rules from VPN or SSLVPN to LAN or Any Internal Zones. When you say VPN user, could you please confirm if you mean SSLVPN user or IPSec GVC user?
With either of these VPN's, the QOS can still be applied using the access rules. But, please be aware that making the QOS change on the common rule between the VPN or SSLVPN to Internal Zones would impact other VPN tunnels such as Site to Site or Tunnel Interface if any present. The alternate option is to create new access rules between the required zones and apply the QOS.
Unfortunately, I don't see an article available for your said setup. I'll probably try adding one.
Answers
Hi @MICHAL,
Thank you for visiting SonicWall Community.
In my opinion, we can apply the QOS priority using access rules from VPN or SSLVPN to LAN or Any Internal Zones. When you say VPN user, could you please confirm if you mean SSLVPN user or IPSec GVC user?
With either of these VPN's, the QOS can still be applied using the access rules. But, please be aware that making the QOS change on the common rule between the VPN or SSLVPN to Internal Zones would impact other VPN tunnels such as Site to Site or Tunnel Interface if any present. The alternate option is to create new access rules between the required zones and apply the QOS.
Unfortunately, I don't see an article available for your said setup. I'll probably try adding one.
Hope this information helps.
Regards
Saravanan V
Technical Support Advisor - Premier Services
Professional Services
Hi Saravanan,
Thank you for your prompt response. Below is a manual, how we add VPN users here:
1/ Firewall -> Address Objects
First of all we add new Address Object
Name:
10.100.xxx.xxx_name_surname
Zone assignment: LAN
Type: Host
IP Address: 10.100.xxx.xxx
2/ Users -> Local Users & Groups:
Here we add new user
====Settings
Name: name.surname
Password: password given
Account lifetime: Never expires
====Groups
Przyporządkowanie do grup
====VPN Access
We connect here with Address Object
That's all
Best regards, Michal
Hi @MICHAL,
Please create an access rule from the VPN or SSLVPN zone to LAN or any internal zones with
Hope this helps.
Regards
Saravanan V
Technical Support Advisor - Premier Services
Professional Services