To sign in, use your existing MySonicWall account. To create a free MySonicWall account click "Register".
Does SonicOS7 have internal setting
like SonicOS6 : diag.html
We need to set
Encryption Settings Enable TLS compatible mode
Yes, we do have the diag page on Gen 7 devices as well. You can visit that by going to the following link - https://<mgmt-ip>/sonicui/7/m/mgmt/settings/diag
Please substitute the IP address of the firewall instead of <mgmt-ip> to get there.
I hope this helps! Thanks!
Technical Support Advisor, Premier Services
I just visit wrong link
Your link goes to Internal Settings correctly.
What I would like to know is the "INTERNAL SETTINGS"
Before SonicOS 6.x it was in https://FW-IP/diag.html
Now did the SonicOS7 have same "INTERNAL SETTINGS"
It is not a normal diag page.
"Encryption Settings Enable TLS compatible mode"
For my legacy web service application
There are a few minor changes, but it should still have that option. I checked on a TZ 670 and can see the following
What device model and firmware are you on?
Great! Glad that it is working correctly.
How do I get to this screen, I need to enable the IKE pass through?
Every time I enter the https:// xx.xxx.xx.xx/sonicui/7/m/mgmt/settings/diag it makes me log in and goes to the regular login and not a diag login.
TZ570 on os7
Same here. Every time I enter the https:// xx.xxx.xx.xx/sonicui/7/m/mgmt/settings/diag it makes me log in and goes to the regular login and not a diag login.
@LandonOliver 13 months later I need to join the party. I tried to access the internal settings on NSa 4700 HA deployments but kicked back to the Login page like you described. I tested on 7.0.1-5080 and -5095 deployments, same outcome.
On the other hand with TZ appliances or NSa 2700/3700 without HA I'am able to access /sonicui/7/m/mgmt/settings/diag without any trouble.
I already different browsers, with and without Incognito mode, no difference.
@shiprasahu93 is there any known issue for this?
@BWC I think I may be an outlier, but I usually log into the device directly, overtype the word mgmt with diag, erase the rest of the line, and press Enter.
Does that work on the devices where the extended form described above doesn't?
The correct path for getting into the diag page would be to login first to the management GUI, then once logged in, the path on the address bar would be: IPaddress/sonicui/7/m/diag :
Hope this helps!
@Larry @TonyA /sonicui/7/m/diag it is and working fine on the the mentioned NSa 4700's as well.
AFAIR I never heard about this specific URL, I always used the /sonicui/7/m/mgmt/settings/diag which is working fine on other Appliances and BTW is the official documented one, just saying 😎
Thanks for bringing up that KB @BWC. I will work on getting this edited to reflect the correct url. :)
@TonyA thanks for checking with the KB team, another KB-article (Topic 6.) mention both URLs, probably not the definition of consistency. But at least one of them will work.
If I search the whole KB for "/sonicui/7/m/mgmt/settings/diag" it'll find many other articles. I would like to know when and why this URL got changed, it really messes things up.
Does anyone know how to action this on the NSv appliance? It seems it redirects me to the normal management portal.