SonicOS7 internal setting
Best Answers
-
shiprasahu93 Moderator
Hello @TomChou,
Yes, we do have the diag page on Gen 7 devices as well. You can visit that by going to the following link - https://<mgmt-ip>/sonicui/7/m/mgmt/settings/diag
Please substitute the IP address of the firewall instead of <mgmt-ip> to get there.
I hope this helps! Thanks!
Shipra Sahu
Technical Support Advisor, Premier Services
5 -
TomChou Newbie ✭
I just visit wrong link
https://ip-address/sonicui/7/m/mgmt/system/settings/diag
Your link goes to Internal Settings correctly.
https://ip-address/sonicui/7/m/mgmt/settings/diag
Thanks
Tom
0
Answers
What I would like to know is the "INTERNAL SETTINGS"
Before SonicOS 6.x it was in https://FW-IP/diag.html
Now did the SonicOS7 have same "INTERNAL SETTINGS"
It is not a normal diag page.
We need to set
"Encryption Settings Enable TLS compatible mode"
For my legacy web service application
Thanks
Tom
Hello @TomChou,
There are a few minor changes, but it should still have that option. I checked on a TZ 670 and can see the following
What device model and firmware are you on?
Thanks!
Shipra Sahu
Technical Support Advisor, Premier Services
Great! Glad that it is working correctly.
Shipra Sahu
Technical Support Advisor, Premier Services
How do I get to this screen, I need to enable the IKE pass through?
Every time I enter the https:// xx.xxx.xx.xx/sonicui/7/m/mgmt/settings/diag it makes me log in and goes to the regular login and not a diag login.
TZ570 on os7
Same here. Every time I enter the https:// xx.xxx.xx.xx/sonicui/7/m/mgmt/settings/diag it makes me log in and goes to the regular login and not a diag login.