TZ250 DMZ Setup Issues
I have a TZ250 running 184.108.40.206-83n and am having trouble setting up a DMZ.
(I have changed the first 3 fields, the network portion of actual IP addresses for privacy reasons. The 4th field (host) is exactly as provided by the ISP, COX Communications)
I want to set up a DMZ for multiple addresses that aren’t NAT’d. They’re for individual VM’s on a Windows Server 2019 running Server 2019 Datacenter Version and each VM has a dedicated physical NIC. These NIC’s will connect to the DMZ Port via a dedicated switch or VLAN.
Before needing to set up multiple static IP’s, the site had 1 Static IP –
Static IP 220.127.116.11
S/N Mask 255.255.255.128
I requested a change to 5 static IP’s and expected to receive a block of 8 with 5 usable, Instead I received the following:
Subnet mask 255.255.255.192
NETBLOCK 18.104.22.168/26 which translates to a range of 22.214.171.124 – 126.96.36.199
The WAN Zone Parameters are 188.8.131.52, 255.255.255.128, 184.108.40.206 (DNS’s are immaterial)
I set up a DMZ using the Portshield Wizard to set up a WAN/OPT/LAN and changed the Unassigned Port to a DMZ.
I’ve had no luck in configuring the Port. I ‘ve tried a variety of configuration parameters.
When I change the Zone from Unassigned to DMZ the screen is populated with Static IP Mode, IP Address 0.0.0.0, S/N Mask 255.255.0.0, Gateway 0.0.0.0
I have tried
220.127.116.11, 255.255.255,192, 0.0.0.0
18.104.22.168, 255.255.255.128, 0.0.0.0
And each of the other assigned Static IP’s
Each time when I click OK the setting reverts to Unassigned, 0.0.0.0, 0,0,0,0, N/A
What am I missing?
Thanks in advance for any help.