Comments
-
Hi, If remove the values for Local IKE ID and Peer IKE ID from both Sonicwalls, how they can recognize and handshake together to create VPN site2site? Thanks,
-
Hi, Iam not try yet, but If possible, I will configure on two firewall on 2 site with SonicWall Auto Provisioning Client or Server?
-
Yes, sure it were match together with 1492
-
Yes sure, It configed X1.
-
These are same sonicwall 3700 and latest version. You mean Peer IKE ID is share secret? I checked many time and it's same configuration, except WAN IP . Thanks,
-
Hi, I've already tried to run no vpn policy site-to-site "vpnpolicyname" and commit also. I checked this rule disappeared and I add manually in GUI. But it did not work and the status still not green. Thanks, Tung
-
Should I run another command after run no vpn policy site-to-site "vpnpolicyname" such as commit or anything like that? Thanks for your support, Tung
-
Hi, It is running with latest firmware of version 7.x. Could you send me the command line to delete S2S tunnel? Thanks,
-
Hi, I use static WAN IP. Yes I will try with AES and DH Group 5 after we have green status of VPN. Thanks,
-
Hi, Both end firewall have the same configuration, except ip address below: If you need information further, please let me know. Thanks, Tung
-
Hi, I've already tried with uncheck the "Enable NAT traversal" but I did not work also even I cause disconnect another vpn site2site on AWS. Back end ISP modem is configured as bridge mode. Thanks
-
Hi, @AJISHLAL , Thank for your reponse. I tried it before raising it into the community but it still did not work. Tung