Comments
-
Thanks for your reply, This is the location,I run the start capture and then telnet the external port or run the portquery, the telnet sessions aresuccessful and portquery for udp is not. after that I export export the logs to the text file and I run a seurch for IP of my PC, but I cannot see the port that I telnet or run…
-
Hi, Thanks for your reply, I did run the packet capture on the NSA and try to telnet the one of the tcp ports to see if I can see it in the logs, but I can not see any telnet from the IP of my PC to that IP address. in the logs I can see that I have RDP connection to the same externel IP but not the telnet command or…
-
Thanks you as always for your quick replay. Then the steps that I mentioned except the creating of an access rule is correct and adding the X5 to LAN zone will be enough and devices connected to the X5 will have internet connection, is this correct? This is my access rule:
-
Hi SHIPRASAH, Thanks as always for your reply, The access points are not configured manaully so we are safe on that regards, I will try with a working access point and see what happens. Thanks
-
Hi SHIPRASAH, I want to disconnect one of the Sonicwall access points that is currently connected to the TZ 215 to run a test with it on the new NSA 2600 that currently has NO internet connection. My question is, can I after testing connect the access point back to the TZ 215? or the NSA 2600 will change settings of the…
-
No I dont see it yet, I just talk to one of the admins and he told me that this access point had some issue in past. I will get a different access point and run a test.
-
This access point before was connected to a switch with a VLAN and the new switch is just an unmanaged switch. After I reset the access point I can see that configuration light is yellow and flashing and also LAN Link is yellow and stay on and the act light is also yellow flashing. Shouldn't we see the Wlan link and act…
-
I just reset the Sonicpoint and see what happens, keep you posted.
-
Hi, I did follow the document that I mentioned and setup the a Wlan and DHCP on the NSA 2600 and I use the same settings and IP address as the old TZ 215. I use one of the SonicPointN access points that was in past was used with the TZ 215 and then connect it to a switch that is also connected to the Wlan port of the NSA…
-
Hi FMADIA, Sorry I saw your reply late, You are right the Sonicwall that we see the profile name on it has an older version firmware. I am following this link to configure the NSA 2600 from scratch, is this up to dated version?…
-
Hi SHIPRASAHU93, Thanks as always for your reply, What I dont understand is why I cannot find that Profile? There is only one place to edit or create a provisioning profiles, correct?
-
Thank you all for your replies I did first upgrade both the devices to the 6.5.1.1-42n and export the config of the NSA 2600 to NSA 2650 and after that upgrade the NSA 2650 to 6.5.4.6-79n I will replace the 2600 this week. Thanks you all.
-
Hi Shipra, Thanks for your reply, If I understood you correctly, First on the current NSA 2600 I have to upgrade from 6.2.7.1 to 6.2.9.2 and then to 6.5.4.5 After I have also to upgrade the new one to 6.5.4.5 and after that we can export the configration from the current NSA 2600 to the new NSA 2650, am I right?