Menu

jgrimes

SonicWall Employee
Default Avatar

Join the Conversation

To sign in, use your existing MySonicWall account. To create a free MySonicWall account click "Register".

Sign In Register

jgrimes SonicWall Employee

Badges (2)

First AnswerFirst Comment
See More

Reactions

0 Promote 1 Helpful 0 Like 0 Spam 0 Abuse

Comments

  • Do you have "Enable Conflict Detection" enabled in DHCP?
    in Does SonicWall TZ470 have a log for IP errors or Duplicate IPs in DHCP Comment by jgrimes August 2022
  • Check the firmware version on the firewall. The current version is 7.0.1-5065. Get yourself on the latest version if you haven't already. If you feel like something is wrong, you can always run the config file through the migration tool again, then reimport. Start checking the simple things, bad cable, etc. It is unlikely…
    in Upgrading 3600 to 3700 NSA import config issues Comment by jgrimes August 2022
  • Hi, Think of of this way. The firewall can't drop it until it arrives at the firewall. If you have logging enabled on Geo-IP, you would see an entry stating that it dropped an IP from a blocked country. Same goes for your SIEM I would expect. Jim
    in critical alert in SIEM Comment by jgrimes July 2022
  • Hi, To answer your questions.... It is up to you what interface on the firewall you use. The only real requirement you have is that there is nothing plugged into it. Your welcome. The interface will have to be set to a zone. You can use LAN on the interface or you can create a custom zone so that you can more easily…
    in TZ370 - Adding a tp-link AX6000 Next-Gen Wi-Fi Router Comment by jgrimes July 2022
  • Hi, What is your connection speed under the Experience Tab under RDP? the Default setting is "Detect connection quality automatically". Are you running on Wifi while connected to SSLVPN? You maybe experience a Microsoft RSC issue. Are you running DPI-SSL (Client or Server)? If so, that maybe causing the issue. Write and…
    in SSL VPN on TZ300. Browser based RDP locks up after 5 minutes. Comment by jgrimes July 2022
  • Hi, Does the Sonicwave have current licenses? If not the settings will freeze and cannot be changed. The existing settings will continue to work though. It is bad practice to have a public IP address, 2.2.2.2, in your internal network as it can cause unexpected conflicts. The firewall will see this a as WAN address. Also,…
    in Sonicwave 231c upgrade error Comment by jgrimes July 2022
  • Hi, The license will download on its own. However, it should take more than a day, and probably shouldn't take that long either. Go to your mysonicwall account and pull up the licenses for your device. If it is not there, then it won't download. Contact the seller and ask them if there are any issues with the purchase, has…
    in SSL VPN license Comment by jgrimes July 2022
  • I found no documentation in sonicwall.com/support or out in the Internet that talks about setting up Okta on an NSA or TZ firewall. Even Okta's website only mentions the SMA units.
    in Okta Integration Comment by jgrimes July 2022
  • This is completely normal. The Active firewall will feed configuration changes to the Inactive firewall. The [I] (the capital letter "i" in the brackets) means the Primary is the inactive unit and the Secondary is the active unit. On occasion the inactive unit will reboot. This is done to keep your inactive unit current…
    in Firewall Reboot in Standby State with in HA status Comment by jgrimes July 2022