Menu

gregc00

Newbie ✭
Default Avatar

Join the Conversation

To sign in, use your existing MySonicWall account. To create a free MySonicWall account click "Register".

Sign In Register

gregc00 Newbie ✭

Badges (2)

First AnswerFirst Comment
See More

Reactions

0 Promote 0 Helpful 0 Like 0 Spam 0 Abuse

Comments

  • Follow-up My switches upgraded to 1.2.0.0-5 After the upgrade I needed to re-establish SNMP on the devices, they still don't get SNMP config from the cloud.
    in SNMP data from SonicWall switches Comment by gregc00 October 2022
  • My SWS14-48fpoe units auto-upgraded to 1.1.1.0-2s and the SNMP pages are back in the local UI. I'm not able to get them to get SNMP config from the wireless cloud manager, but I was able to follow these instructions to get them responding for SNMP v2c Switch Administration Guide - How to configure SNMP on SonicWall Switch…
    in Thoughts on sonicwall switches Comment by gregc00 June 2022
  • I found that my switches had auto-updated to 1.1.1.0-2s Though we have SNMP policies set in WCM the APs and switchers are NOT listening for SNMP. I WAS able to work through the convoluted steps in this doc to get SNMP v2c working on the switches so I can see interface status etc again. Yay! Switch Administration Guide -…
    in SNMP data from SonicWall switches Comment by gregc00 June 2022
  • I see that 1.1.1.0-2s was released 5/11/2022 Release notes mention these as resolved: SWO-1432 SNMP pages are not loading on Switch UI when using Get Command. SWO-821 Adding the SNMP settings related tabs on the Switch UI Has anyone loaded this build yet? Feedback? -Greg C
    in SNMP data from SonicWall switches Comment by gregc00 June 2022
  • I got a note from SW support that firmware 1.1.1.1 is in the works and will resolve the SNMP issues. No ETA though, and switch fw doesn't adhere to a release cycle.
    in Thoughts on sonicwall switches Comment by gregc00 March 2022
  • No, sorry, I was running latest 1.1.0.2 last week and no SNMP. I got a note from SW support that firmware 1.1.1.1 has been announced and should re-enable SNMP (and hopefully fix the previous issues) Still no ETA on the update though. Switch FW doesn't appear to have a regular release cycle... hopefully it'll be fully baked…
    in SNMP data from SonicWall switches Comment by gregc00 March 2022
  • Sonicwall switches don't properly support SNMP at this time. firmware up to 1.0.0.0-39 had it implemented wrong, after that it's disabled until they have a fix for unspecified issues. I also had a brand new sws14-48fpoe which - after 3 days in service - started rebooting all PoE devices every 5 minutes. This was fixed by a…
    in Thoughts on sonicwall switches Comment by gregc00 February 2022
  • I was just told by SW support that snmp has been disabled on current firmware versions, Was enabled thru 1.0.0.0-39 but they found "some issues" and disabled it. We found out after we swapped out a Meraki network, so our map is now a big jumbled mess :( No ETA was provided to me, it would be very good to even have an "off…
    in SNMP data from SonicWall switches Comment by gregc00 February 2022