Comments
-
I agree! The compatibility table lists modules for which support is dropped - that really is a no-go! Additionally: Supporting SFP with 2.5Gb and 5GB only is a deal-braker as basically no fiber modules officially support hat speed. I have tried many SFP-T modules, inculding the as compatible listed 02-SSC-1874 but so far…
-
Considering SFP + Fiber yes its is misleading. Considering SFP / copper I'll get new modules to test soon
-
Hi Yea multi-gig on the TZ470 and 570 is a major disappointment and IMHO a screw up on Sonicwalls side. The SFP compatibility table list modules compativle with TZ470/570: Supported SonicWall and 3rd party SFP and SFP+ modules that can be used with SonicWall TZ series | SonicWall If you buy one of these SFP fiber modules,…
-
Ok that looks also complicated. For a workaround I now have the following idea: Traffic which has no BWM rule applied should autmatically be "medium" priority when I remember it correctly. So by classifying all/most other traffic as either "high" or "medium to lower than medium" I should always get the maximum speed on all…
-
Yikes.... - I mean just for testing this is doable - backup, setup WAN, LAN and 1 VPN - then test, set up BWM and test - if that works however I would have to configure from scratch which will take about 2 weeks and then at the end it is unknown if it will be of any success - I actually hoped for some CLI / Monitoring…
-
Hi, yeah I didn't spec my other connection but I thought that by posting the issues it would be obvious that I wouldn't bottleneck myself with he WAN connection on the other side ;-) As I wrote in the first post: "I set the rule to 100/100 I still get 55-60mbs - clearly that can't be the point of BWM crippling the…
-
Hi As I wrote in my post I do get the full 100Mbs download speed as long as I do not use BWM/traffic shaping - this is not an issues related to available bandwidth or IPsec processing - I have 100mbs upload at the office and 250mbs download at home wiht a TZ370 and Tz570. Additionally I run the test at night in order to…
-
Hi, I just checked and that option was already disabled - so that can't be it. Also GAV IPS etc. are disabled for Zone VPN
-
As said: Clear Browser history Try different browser Also: try a different PC if you are behind a FW with GAV or simialr Also: Try a 1:1 mapping inside the config tool I had the same issues and at one point it finally worked. However afterwards 2 o3 FW rules were missing and 2 NAT rules were not migrated - so even if it…
-
Hi Thx for the reply. All I know is "Mitel SMB" as far as the mode goes. The SIP provider doesn't say much: Session NAT timer 30s No ALG/SIP transformation ...and thats about it... Uh well I guess I better start with port forwarding :-) - and yeah ill include the SIP Server from the provider as source and not "all"
-
Hi, So after a couple of tries I did get it working! Here is what I did: TZ570 factory reset Flash newest FW again Factory reset Remove password complexity from old Tz400 config and exported config converted config 1:1 via migration tool imported config to TZ570 and finally I could connect AND login - so far skipping…
-
Yes thats what ahppened. Ill try again now :-(
-
Uh, you got me there - what? :-) For a clean start I can do: safe mode -> factory reset -> import migration config -> and then what? flash format? - is that a menu option in safe mode and will it keep my config?
-
SSH isnt available on that port - since I uploaded my ol FWs config X0 subnet is identical to the productrion network, so it is not connected and the additional Port I use for configuration SSH is disabled Private widow has the same issue
-
Hi No, the migration is a 1:1 migration so no different ports. And as I said I see the login page, enter the default credentials (as it is after every migration) and then I am beeing asked to enter my new admin password (as usually) but after that I get this non specific error