Comments
-
@CHARPER Site 2 site VPN's they are like routers, they do not see VLAN's What you can do: set up a site to site VPN and use a subnet for each VLAN connection . We use the Mikrotik EoIP behind the Sonicwall to pass VLAN'S over the Site-to-site VPN. .
-
@PRESTON The TZ500W & TZ600 both have a annoying little fan running 24/7, you can hear them clearly. (I have 1x TZ500W and 2x TZ600 all with a Fan) TZ500 Has no Fan.
-
Hello Try to disable "Enable consistent NAT"
-
Hope Sonicwall will add EoIP. I now have a Sonicwall and a Mikrotik behind it to add a EOIP tunnel :(.
-
@SONICTHH there is a timeout option default is set to 10 minutes
-
@FABIN Hello Fabin. 1) Yes with NetExtender. 2) Not with Mobile Connect . To enable the "Control Protocol setting" you first have tho have connection. Which is not possible without this setting. Regards, Rene.
-
Fixed "6.5.4.6-79n--HFGEN6-1285-3n_6.5.4_release_6_5_4_6_3n_1244183" Today I received the new firmware "6.5.4.6-79n--HFGEN6-1285-3n_6.5.4_release_6_5_4_6_3n_1244183" from Sonicwall This firmware fixed the problem. You have to make one extra setting to make it work (new option in this firmware). All thanks to @J, SonicWALL…
-
Checked SonicOS Enhanced 6.5.4.6-79n: still only the sonicwave with the "802.11k, 802.11v and 802.11r"option.
-
@NEVYADITHA The sonnicpoint don't have the "802.11k, 802.11v and 802.11r" only the sonicwave. It has seen it in a beta version a few versions ago, in the final version is was removed. Checked SonicOS Enhanced 6.5.4.6-79n: still only the sonicwave with the "SonicOS Enhanced 6.5.4.6-79n"option. Can you tell why is it removed?
-
@MIKECM We don't have the problems with site to site connection. Multiple tz 300,400 and 500 connected to one central hub tz600, No problems or disconnections.
-
Hi @NEVYADITHA Thank you for letting me know. Regards, Rene
-
@SHIPRASAHU93 I have found de solution. x0 had a portshield from port x4. when we removed the portshield, the option comes available
-
Tz500 on the interface x0
-
@SHIPRASAHU93 Thanx, I have no option to change it. The option is Grayed-out
-
Can the dell x1000 series also be managed with this option ? Manual you can only select: Best regards, Rene