Comments
-
@RINCONMIKE I have no secondary storage installed.
-
I checked and have the same problem. Computer connected directly with a cable. TZ300,400 & 500 firmware 6.5.4.8-89n <1ms TZ270 & TZ570 firmware 7.0.1-5018 avg 5ms
-
@RINCONMIKE I still haven't got any sudden reboots on my TZ270 and tz570.
-
Installed the 7.0.1-5018 TZ570 & TZ270 24 hours no random reboot. With the previous version 7.0.1-R1456 and a config loaded from my gen 6 TZ600 (config load with the Migration Tool and with out) i also had random reboots, and sometimes slow interface. Did a clean install (new config) and had no problems. @Rinconmike Did…
-
@Saravanan Thanks for the answer, The tz270 / tz760 have a little door on the bottom with a normal ssd slot., It will only take a sonicwall SDD, not another brand.
-
@BWC . Thanks fort the answer, I found this my self. It would be nice to have the same option in the Gen 7 Sonicwall.
-
For people with the same problem: I finally found the solution. @shiprasahu93 why is this necessary with the Gen 7 and not with the Gen 6.
-
Nobody with a solution😅
-
@BWC Thanx. It would be a nice option to add, if you have a remote location with nobody on the premises, it is better to be safe than sorry.
-
Thanx @AJISHLAL , Your solution works only on ports that are not Port-shielded. All ports in one Port-shielded Goup, will pass multicast, and I can't find a option for it to enable IGMP snooping. The way I see it: All Port-shielded Goups. you can see as a normal switch with NO option to enable IGMP snooping.
-
Thanx @AJISHLAL and @AJISHLAL for your options. They are not the solution. I have read all this before I asked the question. The problem we have: If you enable Multicast and have a PortShield goup port X4 X5 X6 to X0 all ports are in one big multicast group. We would like to enable IGMP snooping on the group so Multicast…
-
@MASTERROSHI Thanks for the answer, We would like it to have 20Mbps for a Singel Stream VPN Bonding Across Multiple WAN Links
-
@CHARPER Site 2 site VPN's they are like routers, they do not see VLAN's What you can do: set up a site to site VPN and use a subnet for each VLAN connection . We use the Mikrotik EoIP behind the Sonicwall to pass VLAN'S over the Site-to-site VPN. .
-
@PRESTON The TZ500W & TZ600 both have a annoying little fan running 24/7, you can hear them clearly. (I have 1x TZ500W and 2x TZ600 all with a Fan) TZ500 Has no Fan.
-
Hello Try to disable "Enable consistent NAT"