Comments
-
Hi @UTSAV_TRIPATHI, The issue is with the GVC client version. I have seen similar issues in the past with the GVC version 4.10.x slowing down the network bandwidth. This is addressed with GVC version 5.0. You can get GVC 5.0 by approaching our support team. Please find below web-link to reach support contact. Hope this…
-
Hi @DALEWEST, I think we'll have to go through the report produced by the tool and how it works what info SonicWall provides to the tool. It would be better to get this verified over a remote session. I would recommend you to approach our support team for further assistance on this.
-
Hi @THOMAS_BUERGIS, Thank you for visiting SonicWall Community. What version of NSM are you using? If you are on the latest version, then I would recommend you to submit a feedback on this. The URL to access the feedback portal is,
-
Hi @DJHURT1, If it is just a site to site VPN between the offices with no DHCP over VPN imposed, then there is should be no effect on SonicWaves unless you make them to communicate over the Site to Site VPN tunnel. The impact is only on the communication part.
-
Hi @THOMAS_BUERGIS, If you are talking about the taking whole NSM backup on the ESXi itself, then I don't think we have any documents on such. If you are looking to take settings backup from the NSM itself, there should be ways.
-
Hi @ThK and @aschultz, I just got the screenshot of the notification section for you on the CC portal. The notification option is available under Policies | Web Content Filtering, "Show notification when accessing a malware site".
-
Hi @SONIC, Thank you for visiting SonicWall Community. Technically speaking, analyzer should work with NSA 2700. Since there is no change in the syslog parameters and flow on Gen 7. When considering Analyzer, it is End of Life and End of Support too. End of life products are not supported when you come across certain…
-
Hi @MARKM, Thank you for visiting SonicWall Community. There are multiple ways that this can be achieved. If you have lot of IP addresses that needs to be blocked on the SonicWall for access, then I would suggest you to block all IP's and allow only the those that you want to authorize. You can block the IP addresses based…
-
Hi @MANISHKCT, There is no storage value assigned to this option. Please refer Azure pricing details link that I provided for the info on storage pricing.
-
Hi @MANISHKCT, Its a storage account type and leave it to the default for the HA deployment purpose.
-
Hi @MANISHKCT, That's right. Could you please share the screenshot of Standard_LRS storage?
-
Hi @MANISHKCT, Thank you for visiting SonicWall Community. Yes, you can use the KB article for HA setup. You would have purchased two different serials for the HA setup. One is for Primary and the other is for Secondary. Regarding the spacing, please refer section D2-64 v3 in the below web-link. Hope this helps.
-
Hi @PINALDPS, In your previous message, you failed to show the interface details on the dropped packet. Could you please share a screenshot of the dropped packet? Let me take a look.
-
Hi @DALEWEST, I see what you are telling. Could you please check the Connections Monitor section on the SonicWall GUI and see if the IP addresses are listed there with some Tx and Rx bytes?
-
Hi @UTSAV_TRIPATHI, Could you please let me know the version of your GVC on the client machine?