Comments
-
Hi @AKROMAM90, The monitoring IP section lets you to configure monitoring/management IP address for each interfaces on the HA pair. The monitoring IP address dedicates two IP addresses on the interface used subnet for pure firewall (both active and standby) management purpose. The monitoring IP address can be configured on…
-
Hi @TRUCKBOX, Could you please let me know how the UniFi Controller is connected to the SonicWall? I meant to ask, on what port? If the controller is connected to X0 port, then creating VLAN's under X0 would make sense for the WiFi networks. SonicWall does inter VLAN routing by default so no need to additional trunking on…
-
Hi @SAMAJ, Thank you for the explanation in detail. This is possible. Does User Level Authentication (ULA) bypass works for you? Also, the CFS policy created for the specific IP address or range should be on top priority among all other policies. Please make sure to clear browser cache and use different browsers when you…
-
Hi @SAMAJ, Are you trying to bypass an IP address from CFS policy?
-
Hi @MATT, You are absolutely got my point. For the firewall to validate the any traffic, it has to pass the traffic to the security engines and confirm if some suspicious stuff happening or a block policy is hit, etc,., It is also the responsibility of the firewall to report such events otherwise network admin wouldn't get…
-
Hi @LANNYE, Thank you for the detailed setup info. If the subnet mask is 255.255.255.0, then it is going to be a problem. Do you have both these subnets configured on the SonicWall? Is SonicWall aware of the super scope subnet by either creating VLAN's or route policy? Kindly let me know which subnet out of these scopes is…
-
@XDMFANBOY - You could find as per below screenshot.
-
Hi @MIKEL2021, Thank you for visiting SonicWall Community. Unfortunately, the firmware image of TZ 200W cannot be used on TZ 200 due to authenticity on all firmware model images that's built-in. Please let me know for any questions.
-
Hi @SMILEPOINT_GROUP, Thanks for your answers. The resource is not accessible locally on TCP ports 4444 and 4445 and this has to be fixed the local resource since netstat result doesn't show that the local resource is not listening on these ports. Possibly, check for Event Viewer logs on the local resource. If you can get…
-
Hi @Walkman, Thank you for visiting SonicWall Community. Did you get a chance to follow the instructions as per the below KB article?
-
Hi @ALBA, Thank you for visiting SonicWall Community. Are you trying to create user to manage analytics?
-
@SHATY - Thanks for sharing the info.
-
Hi @B3RT, Thank you for visiting SonicWall Community. Analytics 3.1 comes with notable enhancements and this should not be different from analytics 2.5. Upgrade path should be available. I'll get back to you with the download available date in sometime. I'll have to check and revert. Please standby.
-
Hi @MATT, Thank you for visiting SonicWall Community. There may be a single log entry or multiple log entries depending upon the number of hits from the external IP. SonicWall would allow the connections after passing the traffic to all its security engine and verifying that the access is allowed. If the access is denied,…
-
Hi @LANNYE, Thank you for visiting SonicWall Community. I presume you created the second scope and super scope on the same subnet as that of the existing DHCP scope. The client PC's are able to get the DHCP IP addresses from the second scope but they are unable to access the Internet. Do I sound right? If yes, could you…