Comments
-
I did change the subnet mask. That did not resolve the problem. It turns out there was a spare public IP address that the owners of the gateway had. I used that and the problem seems to be resolved. I was told the symptoms can be characteristic of an ARP conflict especially with the new IP address not having a problem, but…
-
I am assuming they are providing multiple static IP addresses. As I mentioned in the comment above the TZ 500, router and TZ 350 all have public IP addresses. Unfortunately, I don't have access to the ISP as that is owned by the company that we are a subsidiary of. I can see what information I can gather from them. They…
-
Thanks for your response and suggestion. I don't have control over the ISP router as that belongs to another company who is providing us use of the router. The router only has a single point of entry for multiple firewalls, hence the dumb switch that the TZ 350 and TZ 500 are plugged into. I did notice from a label on the…
-
The TZ 350 is connected to a dumb switch. There is also a TZ 500 from a different company connected to the dumb switch. The dumb switch is connected to a router that goes out to the internet. There are no internet connectivity issues with the computers connected to the TZ 500. I am able to connect to the LAN side of the TZ…
-
I ended up purchasing the 350 TZ and have been making use of the links above and the online documentation. I went through the quick configuration to set up the device as a gateway. The internal LAN is a 192.168.2. range with a mask of 255.255.255.0. When I try to create the static DCHP scope settings for an address, let's…
-
Thank you. I was using the Search function within the community forum board. Still learning the best way to get to information as I consider purchasing this product. Appreciate your patience and help.
-
This is the very type of information I was looking for! Thank you! Is there a knowledge base article on setting up the TZ 350 to assign static IP addresses in the LAN zone?