Mr_Klaatu

SonicWall Employee
Avatar

Join the Conversation

To sign in, use your existing MySonicWall account. To create a free MySonicWall account click "Register".

Mr_Klaatu SonicWall Employee

Badges (8)

3 Year Anniversary10 Comments2 Year AnniversaryFirst Answer1 Year AnniversaryName DropperFirst CommentPhotogenic

Comments

  • There are 3 ways of doing what you want if your block of 5 IP's is in the same subnet (contiguous or non-contiguous). For example, 5.5.5.0/29 or 5.5.5.0/255.255.255.248 gives a block of 5 IP's (5.5.5.1, .2, .3, .4, .5) and a DG Default Gateway (.6) for host addressing. In this example IP: 5.5.5.1 SM: 255.255.255.248 and…
  • Hash value is computed by the sender and receiver separately and is stored or send to aid later lookup. Whether it will be stored within the two hosts itself or send within the traffic is based on the application function and its respective protocol design. For example, ESP has a protocol header field called Authentication…
  • @Darshil Here are some online resources that you could use if its for SonicWall GVC Global VPN Client that you are looking for :- How to uninstall a program through group policy script https://learn.microsoft.com/en-us/answers/questions/766288/how-to-uninstall-a-program-through-group-policy-sc SonicWall Global VPN Client…
  • @Jason_W No audio is due to the Firewall not being able to identify and forward Voice related RTP (UDP) Traffic that is received and to be send to the correct end point; because this information is embedded within SIP protocol header using SDP Session Description Protocol and this contains Private Port and Private IP…
  • @WENYEngineering It is not possible to NAT/port forward single/one WAN IP to 3 different target IP's (10.1.130.13, 23, and 24) on the Ports (GRE over IPSEC). If you do so, the result will be random connection to the target IP's. You would need any one of the following to resolve this issue:- Use 3 separate WAN IP's to…
  • @dani_n What you are looking for is redirection of LAN Hosts to a Web Server over an established VPN Tunnel to Azure if the locally hosted Webserver fails. This is not a topology that a NAT can directly address unless we add a bit of a complexity to the setup. Let me explain. -The hosts accessing the web server is on the…
  • @tvalley Please attach a screenshot so as to understand your question about the alert better. If its sensitive and cannot be discussed here, please feel free to contact our Technical Support at https://www.sonicwall.com/support/contact-support/ to speak to a Technical Support Engineer who can assist you over the Phone to…
  • @Trican We have SSLVPN for Mobile Phones. For iOS, MacOS, Android, ChromeOS and Windows 10 (via Windows Store) the name of the SSLVPN Client is Mobile Connect For all Windows(Windows 7, 8, 10) and Linux we also have a standalone SSLVPN Client named NetExtender If SSLVPN is not suited for your remote access then we have…
  • @kennymathews2003 Standard Site to Site Policy Based VPN's do not allow the configuration of redundant tunnels to the same remote internal networks using 2 different IPSec Gateways. It does allow a 'secondary IPsec gateway' as a backup peer (with Horizon) when the VPN negotiation fails to get a response from the 'primary…
  • @ratherman The below KB Article will help you to understand that its Intrusion Detection/Prevention Service that could be blocking the Camera/App Traffic with the message Drop Code: 132(IDP detection DROP_IP_IDP_RESET_CONNECTION), Module Id: 25(network). You might want to check the EventLogs to see if there is an event…
  • @Alberto The above MS Article describes the intent of long parameter (32Bit) or lParam for Windows Applications. If you have a specific issue with NetExtender please provide more details of the issue or please feel free to contact our Technical Support at https://www.sonicwall.com/support/contact-support/ to speak to a…
  • @bretttley Please describe your issue in detail or please feel free to contact our Technical Support at https://www.sonicwall.com/support/contact-support/ to speak to a Technical Support Engineer who can assist you over the Phone to address your issue.
  • @janvic123 -If the Core Switch is L3 Switch then ideally the Client should have the Switch IP as the Default Gateway and Switch should have a default route to forward Internet Traffic to the X0 Interface IP of the Firewall. In this case the SonicWall should have a 'return' route policy that has the following parameters:…
  • @sukur55 I am not sure if I got your questions correct. If you are trying to interpret the SonicWall SNMP traps, you can use the MIB file on a MIB Browser. You can get the MIB File for your Firewall and the specific Firmware that is running on the Firewall. Its available as a file download at the mysonicwall.com account…
  • @Nico_network For HTTPS Management Access to over NAT you need to edit the VPN to LAN Access Rule that is auto added and check the option 'Enable Management' under the 'General' TAB For Example: Site A X0 Network is 10.10.10.0/24 and Site B X0 Network is 10.10.20.0/24, but you want to create a VPN between Site A and Site B…