Comments

• sonicwall version 6 devices don't support Sonicwall os7 You cannot update to 7 version

  in Sonicwall 4650 firewall supports Sonic OS 7.0 ? Comment by MitatOnge November 2022
• Hi @dbruyere If you enabled guest service by mistaken. you should disable. Guest service drops all unauthanticated user on the wlan.

  in Paquet dropped Comment by MitatOnge November 2022
• First of all, 1) Register Primary and secondery devices and than update licenses, signature and firmware via cloud or manuel keys. 2) Set HA device into the Primary device mysonicwall page. 3) You should adjust all settings (HA settings), network, zones, security rules on the primary device. (You should assign to X0…

  in Setting up HA fail-over takes down primary. TZ600 pair Comment by MitatOnge October 2022
• @SonicPuk you can find solution below.

  in Problem Connection to Any-Desk-Server by using DPI-SSL Comment by MitatOnge October 2022
• Hi Erdal, What is your connect tunnel mode? (Split tunnel, Tunnel all mode)

  in SMA 6210 - ext. Website with DNS Entry in Active Directory - Mobile Connect Tunnel Comment by MitatOnge October 2022
• Did you enable TCP Stream on GAV and other security services? Please check tcp stream, BW management (Global settings, Access Rule settings, Interface Settings) maybe it could be kb to Gb conversion problem. disable security services on ssl-vpn zones for test.

  in SSLVPN way too slow! Comment by MitatOnge October 2022
• Hi @rfreeman could you share settings details screen shots. Best regards Mitat Önge

  in SonicWave 432i not broadcasting 5g or 2.4g Comment by MitatOnge October 2022
• Hi @shaneslas You should assign to allowed network object into the solar contractros users and create deny access rules for all other zones from contractor users. you can see section 4 for SonicOS7 and SonicOS 6.5

  in GroupVPN Clarity Comment by MitatOnge October 2022
• Hi @StonyCreekCS did you enable netbios over sslvpn settings? Netbios settings on ssl-vpn Ssl-vpn settings

  in Domain joined laptops using Netextender connect but mapped drives are not connected Comment by MitatOnge October 2022
• Hi @A_Bloke could you try clear browser cache and check the vpn settings on the cli

  in Is it too much to ask to get usable information?? Comment by MitatOnge September 2022
• did you check dns sercurity features on sonicwall dns pages? normaly There is no problem dns over vpn during netbios enabled. try packetcapture and check dns packets

  in VPN Failover Speed Comment by MitatOnge September 2022
• You can create mesh vpn topolgy and design route base vpn on the mesh network. especily you should use "Network Monitor" on the route policy. or as @Ajishlal said you can create sd-wan topolgy. below type of vpn knowledge base.

  in VPN Failover Speed Comment by MitatOnge September 2022
• Hi @djhurt1 You can use a few scenario for gvc. 1) you can use sonicwall dhcp server. 2) you can use external dhcp servers. 3) you can deploy sonicwall fw as a dhcp server for all vpn remote sites.

  in GVC and DHCP Comment by MitatOnge September 2022
• Hi @isaiasants You can configure as agrasive mode ipsec VPN. Check below link. https://www.sonicwall.com/support/knowledge-base/configuring-aggressive-mode-site-to-site-vpn-when-a-site-has-dynamic-wan-public-ip-address/170505565649605/

  in Help Comment by MitatOnge September 2022
• I think, Sonicwall transitioned virtual based systems. at the nsa 4700 and uper models. Sonicwall were using VxWorks OS over the past years. First button (Restart Systems) : restart all of restart vm and host os (VxWorks). Second Button ( Restart SonicOS) : only can restart vm SonicOS systems.

  in double restart options Comment by MitatOnge September 2022
More Comments