MitatOnge All-Knowing Sage ✭✭✭✭
Reactions
Comments
-
Hi @lrlsh75 Somewebsite uses a lots of different source links in the web aplications during page loading. in the packet monitor and display tabs. only source ip base filter. not source and destination ip.
-
+1 One type of vpn client software for all Operting systems. @BWC
-
Hello , Thank you for information. I am curious. I think you are using NSA series Sonicwall and on this model Lag has different load balance types like below screenshot.. did you try them? I you cannot change the mpls interface zone as WAN, I don't see another options.
-
Hi All, Could you share "DHCP over VPN" settings? I didn't remember on version 5.9 but version 7 you can find below path. "Network / IPSec VPN / DHCP over VPN"
-
could you draw network schema with ip segments and port connections? we need more information.
-
There is an Another options You can try via Ansible .
-
Hello @Angel I think you have asked on the reddit same question. I wrote a simple and basic explanation. You should create Network monitor probe on the interface and check mpls remote site ip via ping or tcp destinations.
-
Hi @Rob7 what are the X3 interface zone type and syslog server address object zone type? Please check zone details. It must be same and behind the X3 interface.
-
Hi @louismcc please check below article.
-
Please check the logs on the SMA and filter offloading page with mobile device ip addresses. if you did configuration correctly you will see error on the logs. I think mobile device couldn't resolve the offloading activesync addresses. follow the below instractions.
-
If you local devices support HTML5 full functionality, you can browse with clientless SSL-VPN protal page and connect via html5 RDP or other links. what is the casting protocole and ports? did you trace casting packets?
-
Hi @Suhas_More , Could you give more details about network infrastructures? Endpoint quantites. (ip based devices and users) Active directory integration? S2S vpn ? Client2Site vpn? SSL inspection? How many zones do you have? How many Vlans?
-
hello @Manoj , Can you clearfy network topology with viso design ? If I'm not mistake. You have LL router and there are 2 interfaces and behind the router located sonicwall fw? <--Wan IP 1.x.x.x/30 eth0 -->LL ROUTER<-- Lan ip eth1 1xx.xx.xx.xx0/29 to 1xx.xx.xx.xx4/29 --> <--X1 Sonciwall FW X0 --> 192.xxx.x.xx0 to…
-
You don't need to create access rule for printers. just you should create ip helper service for printer discovery broadcast service
-
Generally, I use local web service for url and ip lists. I pull the list from cloud to my local web server and set the firewalls botnet setting for local web server. there is no other way for this situation. you can create a script for pull the url and ip list.