MarkD Cybersecurity Overlord ✭✭✭
Reactions
Comments
-
session times for what exactly
-
Depending on its use if you assign it the same LAN zone the default zone rules apply. If you assign this as a DMZ you have DMZ-WAN and LAN-DMZ but no DMZ to LAN without specific rules. you can create zones based on Trusted or Public and name them as you require. here's the KB article
-
I deploy with Internal NPS RADIUS server with Azure Extensions for MFA into the tenancy
-
Maybe changing the SQL dynamic port range to a static port? TCP Dynamic Port. Note the port number However unless you have set VPN-LAN rules set - there are none by default setting up a VPN implies trust
-
MAC is Layer 2 there are no L3 headers for routing
-
Disable Virtual Office on Non-Lan Interfaces - disabled the UI accessible via a browser, leaving only access via the app Netextender SW mobile etc..
-
I would suggest this is one for the Ubiquity forums - probably on the lines of MDNS https://help.ui.com/hc/en-us/articles/4409866388887-Best-Practices-for-Chromecast-and-AirPlay
-
Each client VPN (Netextender, Mobile access) will use an SSL license the number of licenses is for concurrent connections. A Site-Site VPN does not consume a license
-
VLANs with Layer 2 capable switches and a sub interface on the SonicWALL
-
I would go back to the basic, you don't say this is a 215W using the internal wireless, so I'm assuming an external AP plugged into one of the interfaces. firstly ensure that a device directly plugged into the interface can communicate using the WAN address and work back from there
-
If your "conductor" - actually the Aruba Virtual controller or VC has a network that has a primary usage of Guest, all your clients are allocated private IP address and the VC performs the NAT translation Unless you change the client IP assignment to network assigned, then you can Tag this to the VLAN for your X:30 sub…
-
Having that option disabled will stop access to the Virtual office UI from the WAN
-
log settings to Firewall action
-
what settings did you apply for the virtual office - is it disabled in the portal settings as below?
-
Some ISP's block IPSEC maybe yours is one