Menu

Garyb

Newbie ✭
Default Avatar

Join the Conversation

To sign in, use your existing MySonicWall account. To create a free MySonicWall account click "Register".

Sign In Register

Garyb Newbie ✭

Badges (1)

First Comment
See More

Reactions

0 Promote 0 Helpful 0 Like 0 Spam 0 Abuse

Comments

  • Great! I have access now. I had a discard rule in there. Now I need to control access by LDAP authenication. I have LDAP configured, and the group imported. How due I add it to the rules or interface? Thanks,
    in Firewall config Comment by Garyb June 2021
  • Here is the packet info: Ethernet Header Ether Type: IP(0x800), Src=[00:38:df:4f:92:47], Dst=[2c:b8:ed:76:86:26] IP Packet Header IP Type: ICMP(0x1), Src=[192.168.201.111], Dst=[10.172.1.50] ICMP Packet Header ICMP Type = 8(ECHO_REQUEST), ICMP Code = 0, ICMP Checksum = 12084 Value:[1] DROPPED, Drop Code: 726(Packet dropped…
    in Firewall config Comment by Garyb June 2021
  • I am a new to firewalls like this. I have the following route Any Sec_Lan Any N/A Any Standard 0.0.0.0 X2 1 4 The packet monitor shows the packets dropped.
    in Firewall config Comment by Garyb June 2021
  • Should I add the 10.10.100.X network to interface X2?
    in Firewall config Comment by Garyb June 2021
  • X2 is Office LAN zone X3 is Plant LAN Zone 10.10.100.x is Sec_lan zone
    in Firewall config Comment by Garyb June 2021
  • To clarify the firewall is connected to 2 LAN networks X2- 10.10.201.x X3 - 10.172.1.X another subnet - 10.10.100.x is routed to 10.10.201.X but also needs to reach !0.172.1.x over the firewall.
    in Firewall config Comment by Garyb June 2021