Comments
-
Ok, this is progressing, but I'm stuck at how to change the X0 Default Gateway address. I cannot seem to change it in the address objects as it is greyed out.
-
Hi @shiprasahu93 , I cannot see where I can change the firewalls HF Primary X0 IP and HF Backup X0 IP in the GUI, do I need to change them in CLI? Also, would one option be to: Login via Putty, run sh current-config, then copy all the config from the Putty session to notepad. Run find and replace on the subnets, e.g.…
-
Hi @shiprasahu93 I will not need to change the ip address of the MGMT port. Does each firewall in the HA cluster have its own MGMT ip address or is it shared between the two firewalls in the HA pair? With regards to the HA. Each firewall has an ip address, e.g. 10.1.100.15 and 10.1.100.16, and then a virtual ip of…
-
Hi Shiprasahu93, I will be onsite tomorrow, so I can connect to the MGMT port. Does this require a crossover cable or a standard ethernet cable? The firewall does not act as a DHCP server. I will be logging in on the LAN side. Thanks, Steve