DDI

Newbie ✭
Default Avatar

Join the Conversation

To sign in, use your existing MySonicWall account. To create a free MySonicWall account click "Register".

DDI Newbie ✭

About

Username
DDI
Joined
Visits
4
Last Active
Roles
Member
Points
7
Badges
2

Badges (2)

10 CommentsFirst Comment

Comments

  • Sadly, no. Never got a solution to it. Ended up getting Sonicwall to swap out the TZ600 w/new hardware. Completely reconfigured the device, still had the problems. Replaced all the Comcast cable connectors in the home - minor improvement on speed when we yanked out an old coax cable no one knew was there, but no effect on…
  • Thanks for the tip Karan, we tried what you suggested long before I posted here. Sometimes the calls go out, sometimes not - when they don't, then perhaps 30 seconds later they'll be able to make an outbound call. Usually inbound calls don't work, sometimes they do. Packets inbound on X1 for the X1 IP address get dropped.…
  • Thanks for the tip Karan, we tried what you suggested long before I posted here. Sometimes the calls go out, sometimes not - when they don't, then perhaps 30 seconds later they'll be able to make an outbound call. Usually inbound calls don't work, sometimes they do. Packets inbound on X1 for the X1 IP address get dropped.…
  • Thanks for the tip Karan, we tried what you suggested long before I posted here. Sometimes the calls go out, sometimes not - when they don't, then perhaps 30 seconds later they'll be able to make an outbound call. Usually inbound calls don't work, sometimes they do. Packets inbound on X1 for the X1 IP address get dropped.…
  • Thanks for the tip Karan, we tried what you suggested long before I posted here. Sometimes the calls go out, sometimes not - when they don't, then perhaps 30 seconds later they'll be able to make an outbound call. Usually inbound calls don't work, sometimes they do. Packets inbound on X1 for the X1 IP address get dropped.…
  • Thanks for the tip Karan, we tried what you suggested long before I posted here. Sometimes the calls go out, sometimes not - when they don't, then perhaps 30 seconds later they'll be able to make an outbound call. Usually inbound calls don't work, sometimes they do. Packets inbound on X1 for the X1 IP address get dropped.…
  • Thanks KaranM, I just did that... -- David
  • I have no idea where the l2 mcast errors could be originating at - especially when the Sonicwall is claiming that 192.168.0.77 is a multicast address, and that the destination of 107.125.50.51 is somehow a problem. UDP packet, port 4500. I suspect that these are the packets which are reauthorizing the phones with IKE keys…
  • Thanks for the tip Karan, we tried what you suggested long before I posted here. Sometimes the calls go out, sometimes not - when they don't, then perhaps 30 seconds later they'll be able to make an outbound call. Usually inbound calls don't work, sometimes they do. Packets inbound on X1 for the X1 IP address get…
  • IKE Passthru is configured. DPI is off for the rules for the iPhones. Security services were set up to "except" the IP addresses of the iPhones. Didn't make a difference.