Ajishlal Community Legend ✭✭✭✭✭
Reactions
Comments
-
@Hamod, Can you make sure you can ping from Sonicwall to the internal LAN devices. Also if its possible share with us the Firewall rules for the ping services. (all to all) As per the provided screenshot, ICMP packet dropped due to the Policy. So make sure are you enabled the PING service on LAN interface and follow the…
-
@GaryA Follow the below KB for the NSV sizing;
-
@Larry I am also looking the same but i couldn't find the release note. really disappointed with this kind of the service.
-
@BOE, For example, Your firewall IP is 192.168.1.1 & you want to access the diag page, follow as same as below; https://192.168.1.1/sonicui/7/m/mgmt/settings/diag
-
@boe , On the 7.X firmware, there is a significant GUI change and the options are rearranged to make it easier for configuration. We have the option to use the classic view by a click of a single button that is located on the right-hand top corner, as shown below. The toggle switch should remain ON for a contemporary view…
-
@MandrichKMC Check the connectivity cables in between the Primary & Secondary. If any cables got loose it might be happen what you said above.
-
@SonixWalls RDP port Forwarding is not recommended as per security prospective. Instead to open the RDP port in public, you can use the SSL VPN / Global VPN client for accessing the office machines from remote location. If you want to open RDP port in public, Follow the below KB;
-
@ftt613 For the troubleshooting the subjected issue, do the packet capture and share with us the drop packet information to analyses the issue. You have to do the packet capture while streaming the issued the services.
-
@CertusLab check the rules are properly configured. Suspecting NAT / port forwarding rules are misconfigured.
-
@Robbun Follow the below SonicWALL KB for the printer port related query.
-
As usual silence 😏
-
@TtBs_Battousai Instead the NextExtender, you can use the SonicWALL Mobile connect for the SSL VPN. For WAN GROUPVPN, You can use the MS Windows L2TP VPN Client Access. Follow the below KB's for the both configuration.
-
@Hypnotoad 1) Create address object for those 3 external IP's & create address object group and add those external IP's address objects into the group. 2) Create WAN to LAN Firewall access rule and choose the address object group in the source. 3) Create NAT Policy and select the Original Source and choose the created…
-
@Ganeshkumar what kind of the error message are you getting while registering the product?
-
@QWERTZ , it's not possible to route between identical subnets in the same network. For example, If the same town has 2 identical street names, then it would be very hard for postal services to get the letter to the right person correct?