Configure VPN and Global VPN Client step b step
Hi All, My TZ300 has been reset and I need step by step configuration of the VPN in the firewall and also GVC
I have run through the default wizard and I am unable to connect using the GVC.
I have an modem from ISP and a utp cable connected to the X1 - In the interface the dhcp is set and I see a dynamic ip from the modem/router being assingned.
X0 is connected to the switch and my computers are connected to the switch. I am able to get internet on the computers. DHCP server is also configure in the Sonicwall
But where do I set the public ip address for the GVC in the firewall. In the X1 interface if I set the Public IP address as static IP, I dont get internet on the computers. Any help appreciated.
What should be the step by step.
- What needs to be configured on the modem
- What should be the steps on the Sonicwall Firewall
Objective: Get int the network from a different location using GVC. and also uninterrupted internet on the computers connected to the switch