Menu

Join the Conversation

To sign in, use your existing MySonicWall account. To create a free MySonicWall account click "Register".

Sign In Register

NAT access is not possible with Multiple IP address WAN

Becseven_2395Becseven_2395 Newbie ✭
in Mid Range Firewalls

I am being provided by the ISP with a trunk connection with 2 vlans for WAN as follows:
VLAN 818: subnet /25
VLAN 605: subnet /26
Currently, I am connecting the ISP trunk to port X1 and creating 2 Sub-Interface vlan 818 and 605 with IP Static/subnet.

I have performed NAT to another IP address located in the Subnet, used Wizards, performed Static ARP Entries, but still cannot access it, I see in the system log it says IP Spoof.

So what is the problem in my case, please help me.

2024-12-20_10-43-34.png
2024-12-20_10-49-57.png

Category: Mid Range Firewalls
Reply

Answers

  • ArkwrightArkwright Community Legend ✭✭✭✭✭
    edited December 20

    Can you just clarify, does access to the internet from the firewall itself work?

    I am not sure if you should be able to see anything in ARP entries in a VLAN on PPPoE.

    TBH I don't think I've seen VLANs-over-PPPoE before. Plenty of it the other way around though.

Sign In or Register to comment.