We have upgraded firmware version from Version 7.0.1-5145 to 7.0.1-5161 and getting issue
sukarechhe
Newbie ✭
Hello Folks,
Hope everyone doing well here.
We have upgraded firmware version from Version 7.0.1-5145 to 7.0.1-5161 and getting error of SSL. Attached file here if anyone can review and provide precious suggestion.
Category: Mid Range Firewalls
0
Answers
@sukarechhe I'am seeing this as well on some deployments. In my case it's related to SSO (authentication) to the Firewall.
Is this happening for regular WAN traffic in your case?
—Michael@BWC
I had enabled SSO but as of now it's in disabled mode and still getting this error. logs is of LAN-to-LAN
(Thank you for the reply)
When I had non-standard information reported in the log, working with the Support CSR I had to revert to the Gen6 GUI, check the log to see correct information, then return to the Gen7 GUI.
Log on to your firewall
Change the URL to <ip address:port>/sonicui/7/m/diag and press Enter
Click the Internal Settings button
Search for 'Management Settings'
Change the value for "SonicUI7 as default management GUI" to off
Optionally, reboot the firewall
Log on to your firewall
Check to see if the problem persists
Change the URL to <ip address:port>/diag.html
Click the Internal Settings button
Search for 'Management Settings' and revert the value for the SonicUI7
Optionally, reboot the firewall
Hope that helps - and that it works.
Thanks @Larry :)
@sukarechhe - please do follow up and let us know what transpired
It was related to X0 to X0 connection, seems I had upgraded firmware and that error disappeared, Maybe version specific issue.