TZ600 Secondary settings to Primary
Rob_R
Newbie ✭
Hi there folk,
One of our clients let a supplier take their TZ600 away and add their own rules to allow access to their systems.
However, they took the secondary unit rather than primary, plugged it back in and failed it over to use the secondary.
My question is, if I hit synchronise on the secondary units HA page, will it copy the changes to the primary, or will it overwrite the secondary with what's in the primary?
Best Answer
-
CORRECT ANSWER
shiprasahu93
Moderator
Hello @Rob_R,
It depends on which device is in active state. Any changes made on the standby unit will not take effect.
So, if they are still in HA, you can hit synchronize settings on the active unit and that will send all settings to the standby unit irrespective of whether it is primary or secondary.
If the HA is broken, I would suggest accessing the devices separately, exporting the settings and then importing on the other one.
Thanks!
Shipra Sahu
Technical Support Advisor, Premier Services
5
Answers
Brilliant! Thanks Shipra 😀
The secondary is the current active unit, the HA is still good.
I'll get them synchronised this evening, thank you 😀
Sure, let us know how it goes.
Thanks!
Shipra Sahu
Technical Support Advisor, Premier Services