Options
Cannot access management interface on wan interface
Pischta
Newbie ✭
Hi,
we have 3 Sonicwall firewalls, 2 TZ670s and one TZ370.
On the TZ370 I enabled the https management on the x1 interface, and checked that I have a policy that enables the connection to the interface, but I cannot connect to it. The used port is not even open. I checked that when I enable ssh on a not common port, the port became accessible, but when I set that port for the https management, the port remains closed.
On a TZ670, we had similar problem, but I solved it: I had to enable the Allow management... option at Network/MAC IP Anti-Spoof, then disable https management on the wan interface (x1), and re-enable it.
But that didn't help on the TZ370.
Category: Entry Level Firewalls
0
Answers
Hi @Pischta ,
Please run a packet capture as that will help give some clues
The management access rule (WAN-WAN) All X1 IP management address is enabled by when you enable management under the interface (HTTPS/SSH/Ping) on the Interface. if you have changed the management port from the default 443 under Device/Administration/Management specify the port when accessing the appliance https://xx.xx.xx.xx:mgmtport
Thanks. I found a drop:
DROPPED, Drop Code: 742(Packet dropped - Policy drop), Module Id: 27(policy), (Ref.Id: _2776_qpmjdzDifdl) 3:3)
How can I find, which exact rule dropped the packet?
Look at the Logs - set the log settings to Firewall action - import the template and then you can filter on the source.
Are you trying to access the WAN management from internally by chance?
Thanks Markd. Which template should I import?
Are you trying to access the WAN management from internally by chance?
No. When I check the management interface port from outside, it is closed.
log settings to Firewall action
Thanks. I tried it out. When I try to connect to the firewall from outside, nothing appears about it in the log. If I ping it, I see log entries about it (but why it thinks it is a 'land attack'?). I see log entries about my traceroute. But nothing about my try to connect to its management interface.