Sonicwave 621 | Legacy SonicPoint VAP "scheduled" access times for a specific SSID
Acknowledging that Sonicwave 621 units can currently only be managed by WNM, is there any way to create an SSID with "scheduled" access times. Specifically blocking access on a given SSID say from 11pm till 6am??
We have a facility that made use of that type of functionality provided with VAP objects.
I am hoping I have overlooked something easy. At this point I would embrace a convoluted work around if needs be; Facility Managers absolutely want ability to schedule "Guest" access.
If not, is it possible to submit a product enhancement request?
FYI - the new radios are a huge improvement over the Legacy SonicPoints that were replaced.
Best regards, Kelly Keith
Best Answer
-
CORRECT ANSWER
Larry
All-Knowing Sage ✭✭✭✭
You cannot BLOCK the 11 pm to 6 am slot. What you can do is create the ALLOW 6 am to 11 pm slot.
I have an open case with SonicWall (for two years) about WNM scheduling not respecting Daylight Savings Time. You'll have to test this "in production" at your location to see if you need to manually alter the hours of operation.
1
Answers
Thanks much!
WNM is, well new to me. Or, I am new to WNM; a bit of both, to be sure.
Again, thanks so much for the pointer. Once I was able to create a corresponding "Schedule" object, applying that schedule and a suitable Content Filter to a facility specific SSID became my next steps.
Best Regards, Kelly
@2_Meh - Kelly, SonicWall issued an update to WNM between May 5 and 6. It now accounts properly for DST. Please check your logs and schedules to make sure your devices are operating according to the correct schedule.
Hi Larry:
Thanks for the heads up! I just statused version level of WNM management interface.
WNM Version: 4.3.0-10
Build Time: Fri, 21 Apr 2023 08:01:32 GMT
Will monitor this next few weeks and see if WNM version level changes. Currently running a "manually adjusted/ sprung forward" DST schedule. Will provided a heads up to facility staff to monitor schedule activation. If the fix is in effect in our WNM instance, we will roll back the manual adjustment.
Again, thanks much.
-Kelly
@2_Meh that IS the new version, they only announced the change last week. The DST fix is in production. I had to change a slew of schedules yesterday. Some were correct and others weren't, so I have no idea what they did.
Go into your MySonicWall, click on the Download Center, then By ProductLine. Select All Versions and search for Wireless Network Manager. You'll be able to download the Release Notes...