Bandwidth monitoring on NSA

paloalto · October 2022

Is it possible to set up bandwidth monitoring on an NSA3700 so that a Read-only Admin account can view it?

This would be on the WAN port to see the real-time & logged bandwidth usage.

I cannot find a KB article on this, but if the steps can be outlined that would be helpful.

Sevak · November 2022

Hi,

To enable bandwidth monitoring we need to track bandwidth on applied rules.

Here is the article for GEN7 Bandwidth Management:

Please check this KB for Access-rights for administrators:

Regards,

Sevak Brar

Answers