SonicWave 432o doesn't go Gigabit Ethernet 1000 Base T
neuron_upheaval
Newbie ✭
in SonicWave
Hello everyone!
It's my first time posting here.
I bought a SonicWave 432o Access Point and have headaches making it run at Gigabit Ethernet speed.
At first, I thought the cabling was the issue, so I also bought myself a 65-ft Cat7 cable to connect the Huawei HG8245W5-6T router downstairs to the 432o upstairs.
The router doesn't provide PoE, so I have a 50-W@48-V PoE injector between the router and the access point.
The topology is as follows:
I tested the following troubleshooting scenarios:
- Connect the router to a laptop upstairs. The resulting speed is 100 Mbps.
- Connect the router to a TP-Link access point upstairs. The resulting speed is 1 Gbps.
- Connect the router to the 432o. The resulting speed is 100 Mbps.
I am unsure if there is anything I could do with the 432o to solve the problem. For example, upgrading the firmware, or changing the configuration.
Thank you,
-nu
Category: SonicWave
0
Answers
Yes, you are correct, After changing the PoE injector, the access point went to 1 Gbps.