VLAN Network Problem
Dear All
My default IP pull is full now 192.168.1.1 to 192.168.1.254 full.
Now I created VLAN on parent interface X0. and Vlan (X0:V1) IP pull is 192.168.2.1 to 192.168.2.254.
i can able to ping from 192.168.1.1 to 192.168.2.1, when i assign IP address from Vlan 192.168.2.X all system are not getting IP and not able to connect local network.
please help.
Category: SonicWave
Tagged:
0
Answers
@Doulat
You would have to configure your Network switch for the second VLAN.
@Ajishlal
thanks for replay.
i have unmanageable switch.
below is ping status from system
If you are using unmanageable switch, You cannot get IP from DHCP pool but you can configure those systems static IP and it will work.
hi
i tired this but not able to connect local network
below is screen shot sonice wall dhcp scope and assign static IP to system.
This will not work unless you have manageable L2 switch to tag the VLAN ID to the particular ports.
Since you do not have a managed switch to implement VLANing with you will probably need to expand your subnet. Read up on CIDR and VLSM.