Thank you. After firmware update 6.5.4.6 I have this problem. AWS not used, process active. I have open ticket with support. Maybe some of us have already had similar problems. The AWS service cannot be disabled. Machine NSA6600
as far as I can see from the excerpt above the process was used but currently it's 0% - perhaps was it used in the past? Also, SonicOS always keeps processes running even though they're not used but the usage would be very low.
Answers
Hi Alberto,
thanks for asking in the community. That value is the amount of time the process was used/active compared to the uptime of the firewall.
I hope this answers your query.
Francesco
Thank you. After firmware update 6.5.4.6 I have this problem. AWS not used, process active. I have open ticket with support. Maybe some of us have already had similar problems. The AWS service cannot be disabled. Machine NSA6600
Hi Alberto,
as far as I can see from the excerpt above the process was used but currently it's 0% - perhaps was it used in the past? Also, SonicOS always keeps processes running even though they're not used but the usage would be very low.
Never used. Sometimes process spikes core 0 100% for about 10secs.
Hi I think we made a too large version switch.
From 6.5.2.2 to 6.5.4.6.
Which firmware version is supported after 6.5.2.2?
The support does not say to downgrade but does not say that they are working on a better firmware.
I think after this tour we will change products
Hi, today they made me make a change. Removed the following value:
csc_report_cloud_fqdn = csc-report-bucket.s3.amazonaws.com