Cannot RDP after VPN

Sheldon

Hello all. I have set up a TZ 350 so that an accountant can VPN into a workstation at company ABC... actually RDP over the VPN.

The VPN portion is working... I connect and receive an IP address but I cannot ping anything on the network.

My scheme is 10.1.1.x Company ABC scheme is 192.168.1.x

Upon enabling the VPN with the Global VPN Client I receive, after providing UN and PW, a 192.168.1.x IP.

I cannot ping anything on the network much less RDP in.

I did notice that there are no access rules TO the VPN.

Can anyone please assist?

shiprasahu93

@Sheldon,

Welcome to SonicWall Community.

Since you mentioned that the access rule is missing, could you please add one manually as below

From zone VPN to LAN

Source: VPN DHCP Clients

Destination: X0 subnet

Service: Any

Action: Allow

Please leave all other fields on defaults.

If that does not help, please follow the KB below

https://www.sonicwall.com/support/knowledge-base/unable-to-access-hosts-behind-sonicwall-firewall-when-connected-through-gvc/170503602015632/

Let us know hot it goes and we can assist you further.

Thanks!

shiprasahu93

No problem at all @Sheldon. Glad I could help. Have a wonderful day ahead!

Sheldon

Wow Shipra... that didn't take you long. The only issue was that I didn't have a source called "VPN HDCP Clients"... I used "Any" instead.

I really really appreciate the help!