How to create VLAN for WiFi network in Sonic wall
alijan125
Newbie ✭
I have Tz670 Sonic wall in which X0 is connected to a cisco switch with a network 10.1.52.0. One of port of cisco switch is further connected to E1200 Cisco Linksys Wireless device. Now I would like to create a virtual interface in sonic wall with a different network with a separate DHCP for wireless clients. How to perform this lab. What steps in sonic wall and cisco linksys has to be done.
Category: Mid Range Firewalls
0
Answers
https://www.sonicwall.com/support/knowledge-base/how-can-i-configure-sub-interfaces-or-vlan-interface/170503889544086
https://www.sonicwall.com/support/knowledge-base/configuring-the-dhcp-server-on-the-sonicwall/170505423294713
@Arkwright - you are too kind. By mid-December, I am long out of stock with guiding someone who cannot begin to search, and has the temerity to ask for a hand-out.
Come on Larry, it's Christmas 🤣🤣🤣
But seriously, my hope is that it will help anybody who did google it.
Thanks for your guidance. I would like to inform that My Tz670 has X0 Interface configured with 10.1.52.200 IP address SM 255.255.255.0. As per your guidance I created virtual sub interface with vlan ID 10. I Configured IP address for this interface as 10.1.10.1 255.255.255.0 and also configured the DHCP server for this interface range 10.1.10.2-10.1.10.254. Now I am pasting below the screenshot of my linksys E1200 IP address. Please guide me which IP addresses should I assign in Linksys router.
As you can see the first option is by default set as DHCP second option is IP address and the last option is DHCP. Now I am little bit confuse in this regard as DHCP is already set in Sonic wall and what should I do either static IP address should I configure. Second between Sonic and Linksys I have Cisco Switch. How linksys understand the Vlan ID
My Second Scenario I want my wireless users access Internet via connected to linksys wireless router. I am pasting my current lab diagram. Please guide