Reconfigure sonic wave 231c

Abid

We want to switch one sonic wave 231c from guest network to regular network
It is currently on X3 and like to move to X2 among other three 231C which are connected to netgear POE switch.

I can’t seems to figure out how to change the interface and Static IP address.

TKWITS

It's unclear if your statement "I can’t seems to figure out how to change the interface and Static IP address." is referring to the Sonicwall firewall or the Sonicwave AP. Presumably the AP.

IIRC (its been like 10 years since I used Sonicwaves) the Sonicwaves aren't configured individually, they obtain most of their settings from the firewall. So you should just be able to move the Sonicwave to the correct network and it should pick up the correct information. Make sure you have a DHCP server running on the correct network.

If that doesnt work you can always 'forget' the Sonicwave from the firewall, factory default the AP, then set it up on the correct network as needed.

Abid

Thank you. Reset to more than 8 seconds did the trick.