Menu

Join the Conversation

To sign in, use your existing MySonicWall account. To create a free MySonicWall account click "Register".

Sign In Register
Options

Access http management through laptop's wireless lan

alijan125alijan125 Newbie ✭
in Entry Level Firewalls
I have XO interface with default IP address 192.168.168.168 & second interface W0 for wireless has IP address 172.16.31.1. I configured static IP on my laptop's lan 192.168.168.200 255.255.255.0 default gateway 192.168.168.168. while for Laptop's wireless Lan I configured static IP addresses 172.16.31.200 255.255.255.0 default gateway 172.16.31.1 Now I created two address objects one for Laptop's lan 192.168.168.200 & configured default access rule (LAN to LAN zone) I allowed only this Laptop's lan IP 192.168.168.200 for ping ssh , http management & https management & finally I tested only My laptop's lan IP address 192.168.168.200 accessed the sonic wall management (192.168.168.168) but now Same like I want to access the sonic wall management through wireless gateway 172.16.31.1 using wireless lan address object 172.16.31.200 only. which access rule & zone (from to) I should configure in default OR new please help
Category: Entry Level Firewalls
Reply

Answers

  • Options
    MarkDMarkD Cybersecurity Overlord ✭✭✭

    What zone if the W0 interface in WLAN?

    is management enabled on the interface?

    is there a rule WLAN-WLAN management access for your IP 172.16.31.200  as the source

    image.png

  • Options
    alijan125alijan125 Newbie ✭
    Sir I couldn't understand the answer. You are requested to explain simply as per my Question as me new in firewall
  • Options
    alijan125alijan125 Newbie ✭
    I am using tz 105 firewall
  • Options
    MarkDMarkD Cybersecurity Overlord ✭✭✭
    edited April 29

    Rules are applied to Zones, so it would depend on what zone your W0 interface is in hence my 1st question.

    Next is management enabled on your W0 interface

    And is there a rule Zone-ZOEN (IE) WLAN-WLAN management access for your IP 172.16.31.200  as the source or is it just source ANY as in the image?

  • Options
    alijan125alijan125 Newbie ✭
    Sir I am using zone to zone (Wlan to Wlan) & in default rule I couldn't see my address object which I created for my laptop IP address 171.16.31.200 & management is enabled on W0
  • Options
    MarkDMarkD Cybersecurity Overlord ✭✭✭

    I suggest your  laptop IP address 171.16.31.200 - isn't in the WLAN zone

  • Options
    alijan125alijan125 Newbie ✭
    My laptop is connected through sonic wall wireless
  • Options
    MarkDMarkD Cybersecurity Overlord ✭✭✭

    I mean the address object used in the rule of you laptops IP 172.16.31.200 check that it is in the zone "WLAN" and not LAN and you use this object in the WLAN-WLAN management rules

    image.png

Sign In or Register to comment.