Success fully created VLAN 4000 but anyone please help how to configure static routes in firewall TZ

AlainPharmacy

Configure interface VLAN4000 on your FW with IP address 100.100.100.1/29. 100.100.100.6 will be reachable from FW

Configure static routes to below IPs with next hop 100.100.100.6 (NSG).

83.111.145.225

83.111.145.226   

94.57.104.1

94.57.104.2

94.57.104.3

94.57.104.4

94.57.104.5

94.57.104.6

94.57.104.7

MustafaA

Hello @AlainPharmacy

Create Address Objects for each IP address in your list, nine in total.

Create an Address Group Object and then add these Address Objects to this new group.

Create an Address Object for your GW 100.100.100.6

Go to Network - Routing Policy and add a static route policy.

Under the "Lookup" tab select the Address Group Object for the "Destination"

Go to the "Next Hop" tab.

Select the Virtual Interface associated to your VLAN4000 in the "Interface" drop-down.

Select the Address Object you created for your GW, in the "Gateway" drop-down.

Make sure to add/modify the other info such as Name, Metric etc.

Click on the "Add" button.

This static route policy should route the traffic to your destination 9 IP addresses via the gateway 100.100.100.6