print locally while connected to netextender
bmaninparadise Newbie ✭
I was made aware of a problem that just started happening. When a user connects to the netextender/vpn, the local printers are not available until they disconnect from the VPN. I tested this myself and find it true. I've read one post regarding "tunnel all mode" and this option is disabled. I can restart the device tonight and see if that makes a difference. I'm not sure what else has changed as this device has been in service for a long time, years.
Category: Secure Mobile Access Appliances
Hey! You will be signed out in 60 seconds due to inactivity. Click here to continue using the site.
You havent provided much information. Are the local printers networked, and if so is there a subnet overlap with the SSLVPN client?
Yes, that's exactly what it is. I just don't know how to add a route, etc. The user has a network printer with an up of 192.168.1.xx. The Sonicwall Netextender I see has static routes for destination IP4Network with the same subnet as the end user.
Resolve the conflict by changing the SSLVPN Client IP range.
That's not the problem. The client IP range is 10.10.10.XXX network.
"The Sonicwall Netextender I see has static routes for destination IP4Network with the same subnet as the end user."
So remove the route if it is not needed. It's under SSLVPN Client Profile \ Routes I believe.