Menu

Join the Conversation

To sign in, use your existing MySonicWall account. To create a free MySonicWall account click "Register".

Sign In Register

NSA 220 vpn question

mrshahinmrshahin Newbie ✭
edited June 2021 in Mid Range Firewalls

Hi guys,

We have an NSA 220 version 5.9.2.7-5o and I have setup a site to site connection to the aws.

from the Sonicwall side I can see green lights on both tunnels, but at the aws side it says tunnel is down, but also says: IPSEC up.


image.png

What is also strange is that I dont see the table static roots when go to the sit 2 site, there should be 4 tables,

image.png


Category: Mid Range Firewalls
Reply

Answers

  • shiprasahu93shiprasahu93 Moderator

    Hello @mrshahin,

    Since these are route-based VPNs, probably phase 2 is still not complete as the static routes are not in place. Could you please add the routes on the firewall for AWS and then test?

    Thanks!

    Shipra Sahu

    Technical Support Advisor, Premier Services

  • mrshahinmrshahin Newbie ✭

    Hello @shiprasahu93 Thank you for the reply,

    I have already setup the 2 routes in the NSA 220, is this what you mean?

    Thanks

  • mrshahinmrshahin Newbie ✭

    My problem has been resolved, it was a misconfiguration on my part, correct the issue and everything works,

  • shiprasahu93shiprasahu93 Moderator

    Good to know. Thank you!

    Shipra Sahu

    Technical Support Advisor, Premier Services

Sign In or Register to comment.