Damage Version Netextender

Darshil

Hi Team,

We are facing an issue while installing the netextender client after updating windows 10 to version 2004. We are getting the below error message while the installation. I have referred to all the steps given in below in the below article.

https://www.sonicwall.com/support/knowledge-base/damaged-version-of-net-extender-error-message-on-windows-10/170707194358278/

shiprasahu93

@Darshil,

It could be probably due to the memory integrity setting.

You can turn that OFF under

---> Start > Settings > Update & Security > Windows Security > Device Security and then under Core isolation, selecting Core isolation details.

https://support.microsoft.com/en-us/windows/a-driver-can-t-load-on-this-device-8eea34e5-ff4b-16ec-870d-61a4a43b3dd5

Let us know if that helps.

Thanks!

Darshil

Hi @shiprasahu93

Is any other solution is available. This issue we start facing only after upgrading windows 10 to server 2004 version. We don't want to make any changes at the system level.

TKWITS

So what firewall hardware and firmware version are you using? Did you try an updated version of NetExtender? I recommend 8.6.266 or greater. The version mentioned in the article (8.6.265 ) was problematic as well.

Ajishlal

Hi @Darshil

Try to use the Sonicwall SSLVPN NetExtender Mobile app on the WIndows 10 Store

https://www.microsoft.com/en-us/store/p/sonicwall-mobile-connect/9wzdncrdsfkz

Follow the below KB for the installation steps.

https://www.sonicwall.com/ja-jp/support/knowledge-base/170502784131072