GVC Route all Traffic through VPN
I have a NSA 2400 and Some of the users use the GVC and some L2TP.
When they are using the GVC on windows, if they try to check their IP in a website like www.myip.com, they will get their external IP address (mobile network IP, home broadband IP) instead of the fixed IP address the VPN has.
But, If they access from L2TP on windows, then the connection pass all through the VPN and when they access myip.com, they see the VPN address there.
Is there any configuration missing on my side to make the GVC send all traffic through the VPN?
Welcome to SonicWall community.
Please make sure that WANGroup VPN is configured as per the KB below
Also, for route all traffic, we need 'This Gateway Only' option selected under client settings along with 'set default route as this gateway' check box enabled. The users connecting should have WANRemote Access networks as VPN access. Sometimes, we need an additional NAT policy which is also listed in the KB above.
Technical Support Advisor, Premier Services5
Thank you for visiting SonicWall Community.
This is because with L2TP VPN, the option "Use default gateway on remote network" is enabled by default on the L2TP VPN Adapter and this check box should be disabled manually. Please refer screenshot below.
Hope this helps.
Technical Support Advisor - Premier Services
Thanks @shiprasahu93! The guide is very good!
Perfect @RhuanBarreto. Glad I could help.
Technical Support Advisor, Premier Services