how to pull UDP and record to server drive

dak_kol

Need help - newbee here

pull UDP and record to server drive

I need to pull udp packets from a remote IP and port and record it on a drive on a virtual server at a data center:

IP is 10,8.6.30

Port is 1516

Virtual server is running Windows Server 2020

What tool is best to set up a full time process to record

script must be able to be used simultaneously on multiple IP and ports to record from different sources.

Saravanan

Hi @DAK_KOL,

Thank you for visiting SonicWall Community. Pardon you for the delayed response.

If you are looking for an option to capture the packets on the SonicWall firewall appliance for UDP service and specific IP address and to save these on a local computer's drive, please use the below KB links as a reference and proceed.

https://www.sonicwall.com/support/knowledge-base/how-to-log-packet-monitor-results-to-an-ftp-server/170503699687976/

https://www.sonicwall.com/support/knowledge-base/how-to-configure-sonicwall-packet-monitor-to-send-the-captured-packets-to-filezilla-ftp-server/170505759948480/

If you are planning to capture the packets directly on the local server, please use Wireshark tool. You can explore Wireshark online or from below weblink,

https://www.wireshark.org/

Hope this helps...